This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual. This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.Dependent upon your location, this opportunity offers a generous relocation package.

This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual.- This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.Dependent upon your location, this opportunity offers a generous relocation package.

- This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.Dependent upon your location, this opportunity offers a generous relocation package.

The role of Lead Electrical Engineer may include the following responsibilities:- This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - Preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - Guiding and mentoring junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Lead Protection & Control Engineer you will primarily review the work of others.  That work will typically consist primarily of protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for reviewing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform review of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

Due to continued growth, our Electric Grid Infrastructure Services Group is seeking an experienced Lead Electrical Engineer.- This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of distribution and transmission substation projects.- As a Lead Substation Physical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering and design issues.- As a Lead Substation Physical Engineer, you will prepare reports and support project deliverables that present technical and project information in a clear and concise manner and meet client requirements and S&L formats. Typical deliverables include: Facility Studies, General Arrangement, Equipment Plans and Sections, Foundation Plans, Grounding and Conduit Plans, Equipment Connection Details, Control Building Plans and Sections. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.”- In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Lead Protection & Control Engineer you will primarily review the work of others.  That work will typically consist primarily of protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for reviewing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform review of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.This role offers a hybrid work arrangement, with the expectation of spending three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.

As an Associate Intern, you will be assigned to work on a project team and assist the Transmission Line Engineering team members in the execution of their project work. These projects may involve the design of new and/or modifications and upgrades to Transmission Line engineering projects.- Working under the direction of senior engineers, this position will offer you the opportunity to utilize and expand your academic background in engineering one or more of the following areas:- - Assist in the preparation of engineering calculations, drawings, and specifications.- Design of Foundations, Development of Structural Loading, Analysis of Transmission Structures.- Work on a variety of tasks associated with project reporting, such as tracking and evaluating project activities, project progress, and associated data.Please note that this internship position does not provide a subsidy for relocation expenses.

Sargent & Lundy’s Government Services Division provides cutting-edge engineering design and consulting support to the management and operating contractors for US Department of Energy (DOE) sites and national laboratories. Specifically, we support the DOE Environmental Management Directorate as well as the National Nuclear Security Administration laboratories and sites. What does this mean? You can be a part of multi-discipline design teams supporting projects cleaning up the environmental damage associated with the legacy nuclear weapons production complex and/or preserving our country’s nuclear deterrent. Sargent & Lundy’s personnel design facilities, systems, and equipment that treat, store, and dispose of nuclear waste as well as systems that safely handle and process nuclear material. This mission-critical work is meaningful and challenging – work you can be proud of. Our Government Services Group, one of our five (5) market focused business units, has opportunities for engineering professionals in our design group.  This group specializes in DOE facility design, both new and retrofit designs, as well as special purpose gloveboxes and the associated controls and auxiliary systems, precision furnaces, hot cells, custom pressure vessels and other one-of-a-kind equipment. As a member of a multi-disciplined project team, this position will offer you the opportunity to utilize and expand your designer background and/or technical experience in Instrumentation and Controls, Automation, and Electrical Design. You will be responsible for the following:- Work on project teams with other I&C designers and engineers involved in the design of new Programmable Logic Controller (PLC) based control systems, Instrumentation, automation systems, communications systems, Safety Instrumented Systems (SIS), and other industrial control system platforms- Be involved in the preparation of design media for the procurement and implementation of software, instrumentation, and control system platforms- Develop your career via peer learning by way of Sargent & Lundy's systems of process and associated "Communities of Practice"- Utilize and expand your design and drafting skills, while working in a multi-disciplined team environment with other designers and/or engineers in the preparation of design drawings based on design input- Apply your computer-aided drafting skills in 2D and 3D design software environments- Create drawings to scale showing relation of proposed installations to existing facilities and exact specifications and dimensions- You may accompany and assist experienced engineers and designers on walkdowns at client facilities to gather information for your design project

Nuclear Power is a carbon-free energy source. Our electric power generation clients are digitizing their existing power plants and building new nuclear power plants, small modular reactors (SMR). This is expanding work in the Instrumentation and Controls Engineering group. You will work on major process controls engineering projects in the following areas: - Develop and market high level, complex programs for nuclear power projects associated with design, operational excellence, safety, maintenance, and project management.- This position will offer you the opportunity to direct technical decision making, in a project team environment with other engineers and designers involved in the design, modification, and analysis of new and existing power plant controls systems, specifically digital upgrades- You will work on challenging assignments that include investigating, troubleshooting, and solving a wide variety of instrumentation & controls engineering issues,- Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements,- Perform Digital Systems Design Development -- PLC, DCS, HSI, networked computer systems, and digital instrumentation & control systems functional requirements for nuclear plant systems.  Work collaboratively on quality assessments and critical digital reviews,- Perform consulting level work for digital IOT, innovation, and strategic first of a kind (FOAK) projects for the nuclear industry,- Prepare and review detailed calculations, including scaling, uncertainty, and setpoint calculations for analog and digital controls applications,- Prepare documentation for design input for drawing production including master diagrams and schematics,- Interface with vendors to prepare and review materials and equipment purchase specifications,- Prepare reports and studies that present technical information in a clear and concise manner to meet client requirements,- Perform independent reviews of work performed by others including calculations and drawing preparation,- Attend client meetings and site walkdowns to validate scope and ensure client satisfaction,- Support station outage activities as required 

- Develop and market high level, complex programs for nuclear power projects associated with design, operational excellence, safety, maintenance, and project management.- This position will offer you the opportunity to direct technical decision making, in a project team environment with other engineers and designers involved in the design, modification, and analysis of new and existing power plant controls systems, specifically digital upgrades- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of instrumentation & controls engineering issues,- Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements,- Perform Digital Systems Design Development -- PLC, DCS, HSI, networked computer systems, and digital instrumentation & control systems functional requirements for nuclear plant systems.  Work collaboratively on quality assessments and critical digital reviews,- Perform consulting level work for digital IOT, innovation, and strategic first of a kind (FOAK) projects for the nuclear industry,- Prepare and review detailed calculations, including scaling, uncertainty, and setpoint calculations for analog and digital controls applications,- Prepare documentation for design input for drawing production including master diagrams and schematics,- Interface with vendors to prepare and review materials and equipment purchase specifications,- Prepare reports and studies that present technical information in a clear and concise manner to meet client requirements,- Perform independent reviews of work performed by others including calculations and drawing preparation,- Attend client meetings and site walkdowns to validate scope and ensure client satisfaction,- Support station outage activities as required 

- Develop and market high level, complex programs for nuclear power projects associated with design, operational excellence, safety, maintenance, and project management.- This position will offer you the opportunity to direct technical decision making, in a project team environment with other engineers and designers involved in the design, modification, and analysis of new and existing power plant controls systems, specifically digital upgrades- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of instrumentation & controls engineering issues,- Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements,- Perform Digital Systems Design Development -- PLC, DCS, HSI, networked computer systems, and digital instrumentation & control systems functional requirements for nuclear plant systems.  Work collaboratively on quality assessments and critical digital reviews,- Perform consulting level work for digital IOT, innovation, and strategic first of a kind (FOAK) projects for the nuclear industry,- Prepare and review detailed calculations, including scaling, uncertainty, and setpoint calculations for analog and digital controls applications,- Prepare documentation for design input for drawing production including master diagrams and schematics,- Interface with vendors to prepare and review materials and equipment purchase specifications,- Prepare reports and studies that present technical information in a clear and concise manner to meet client requirements,- Perform independent reviews of work performed by others including calculations and drawing preparation,- Attend client meetings and site walkdowns to validate scope and ensure client satisfaction,- Support station outage activities as required 

Nuclear Power is a carbon-free energy source. Our electric power generation clients are digitizing their existing power plants and building new nuclear power plants, small modular reactors (SMR). This is expanding work in the Instrumentation and Controls Engineering group. You will work on major process controls engineering projects in the following areas: - Develop and market high level, complex programs for nuclear power projects associated with design, operational excellence, safety, maintenance, and project management.- This position will offer you the opportunity to direct technical decision making, in a project team environment with other engineers and designers involved in the design, modification, and analysis of new and existing power plant controls systems, specifically digital upgrades- You will work on challenging assignments that include investigating, troubleshooting, and solving a wide variety of instrumentation & controls engineering issues,- Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements,- Perform Digital Systems Design Development -- PLC, DCS, HSI, networked computer systems, and digital instrumentation & control systems functional requirements for nuclear plant systems.  Work collaboratively on quality assessments and critical digital reviews,- Perform consulting level work for digital IOT, innovation, and strategic first of a kind (FOAK) projects for the nuclear industry,- Prepare and review detailed calculations, including scaling, uncertainty, and setpoint calculations for analog and digital controls applications,- Prepare documentation for design input for drawing production including master diagrams and schematics,- Interface with vendors to prepare and review materials and equipment purchase specifications,- Prepare reports and studies that present technical information in a clear and concise manner to meet client requirements,- Perform independent reviews of work performed by others including calculations and drawing preparation,- Attend client meetings and site walkdowns to validate scope and ensure client satisfaction,- Support station outage activities as required