This position allows for a hybrid work schedule with a mix of work spent in office and working remote from home.  This position in Sargent & Lundy’s Consulting group will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Senior Energy Consultant, you will work on a wide range of owner’s engineering substation reviews to support client requirements including reviewing calculations, document designs, and specifications. - You will be responsible for performing owner’s engineering reviews of relaying philosophies, including relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams. - As a Senior Energy Consultant, you will be responsible for guiding junior and senior-level engineers in protection and controls engineering review efforts.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis of single line diagrams, substation relaying & metering diagrams (i.e. AC & DC schematic diagrams), and electrical design studies, including:- cable ampacity - load flow- short circuit- grounding- lightning/surge protection- arc flash- temporary overvoltage- insulation coordination- harmonics- sub-synchronous resonance- protection & coordination - Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.- Other job duties as a Senior Consultant may also include:- Preparing and reviewing engineering deliverables such as reports, studies, and calculations- Collaborating with teammates to define project execution plans- Monitoring project schedules and budgets- Supporting multiple projects simultaneously and ensuring high standards of deliverables are met- Interfacing with clients to understand requests and confirm successful project execution- Preparing proposals for new business development opportunities- Traveling from time to time to visit project locations and client offices.

Sargent & Lundy is one of the largest and most experienced power industry engineering and consulting firms. We have a unique and exciting opportunity to join our Consulting group in the role of Electrical Engineering Lead for renewable energy projects. We are seeking detail-oriented professionals with solar and battery energy storage electrical engineering design experience.This position is being added to support the continued growth of the Sargent & Lundy Consulting group, particularly in the renewable energy, battery energy storage, and utility planning / advisory practice areas. Our Consulting group works with clients across the United States and in numerous other countries.This position will require a great deal of face-to-face interaction with power plant developers and owners, as well as lenders and investors, during the execution of consulting services work for the firm. The work environment in our Consulting group is fast-paced, dynamic, and interesting. This position in Sargent & Lundy’s Consulting group will require you to be the electrical engineering lead for our owner’s engineer engagements for utility-scale solar and battery energy storage projects developed by our electric utilities and Independent Power Producers (IPPs) clients. Common tasks include: - Preparing solar and battery energy storage EPC RFP packages and associated technical specifications- Evaluating EPC proposals to assist selection of preferred EPC contractors- Providing technical support during negotiations of EPC contract- Preparing or reviewing specifications such as main power transformer- Reviewing EPC contractor’s electrical engineering design drawing packages and supporting calculations- Renewable low-voltage (both DC and AC) systems- AC collection system for solar and batteries- Collector substation and interconnecting substation expansion- Gen-tie transmission

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Lead Protection & Control Engineer you will primarily review the work of others.  That work will typically consist primarily of protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for reviewing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform review of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

- This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects.- As an Electrical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues.- As an Associate Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Automation Engineers design SCADA systems to address operational requirements & emerging trends including Smart Grid, Substation & Distribution Automation applications, Battery Energy Storage, and Microgrid controllers. As an Automation Engineer in our Electric Grid Infrastructure Services business unit you will:- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.  - Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.- Provide reviews/design input of P&C drawings for SCADA system requirements.- Develop points lists for data transferred between RTUs, IEDs, and master station connections.- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).- Develop SCADA system and Network documentation for projects.- Develop automation tools to improve project efficiency (python, etc.)- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Responsibilities may include the following:- Design transmission lines in the 69kV to 765kV range.- Mentor and train less experienced design team members.- Coordinate design activities to ensure installation and operations will comply with specifications, codes, and client requirements.- Prepare reports and studies that present technical information in a clear and concise manner and meet client requirements and S&L formats.- Perform independent reviews of work performed by others including calculations, drawing preparation, and transmission line models based in PLS-CADD.- Adhere to Sargent & Lundy's System of Processes.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.  

This position will offer you the opportunity to manage project team(s) consisting of engineers, designers, estimators, controls and scheduling professionals involved in the design, modification, and analysis of new and existing high voltage substations. - You will work on challenging assignments from individual projects, large projects, major programs, to large scale engineering only, Engineer Procure and EPC projects. - Direct the team lead in the coordination of detailed design phases for all aspects of electrical engineering work.- Coordinate and manage work performed by other stakeholder on the project such as civil, structural, and transmission lines. - Lead efforts to ensure projects are completed with high quality, on time performance, and within budget.- Identify and track potential out of scope work, develop and provide scope changes, and coordinate with the client for approval.  - Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements. - Collaborate with staff both locally and nationwide. - Prepare reports and studies that present technical information in a clear and concise manner, and meet client requirements and Sargent & Lundy formats.- Perform reviews of work performed by others including but not limited to calculations, drawings, reports, material and construction specifications, procurement specifications.- Communicating directly with clients, providing both project support and overall account support. - Support the company in business development opportunities with existing and potential clients. - Perform and provide independent reviews of work performed by others, including scopes of work, proposals, procurement specifications, and contract documents.- Develop and mentor team members. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects.- As a Substation Electrical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues.- As an Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Senior Protection & Control Engineer you will primarily prepare protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for preparing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform preparations of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

This position will offer you the ability to apply and expand your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to: - Design transmission lines in the 69kV to 500kV range. - Responsibility for cost analyses, development of design criteria, routing and siting of transmission lines. - Responsibility for conductor selection studies, shielding, grounding and induction studies. - Work with vendors and clients to specify transmission line components. - Direct a small project team.The position will also offer you the opportunity to:- Work with experienced engineers and mentor less experienced staff.- Work with a diverse client base and interact with the client and other project teams. - Occasional travel for site visits and client meetings.- Develop proposals and cost estimates for new work.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Senior Protection & Control Engineer you will primarily prepare protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for preparing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform preparations of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of utility-scale renewable energy projects. As a Senior Renewable Energy Engineer in our Electric Grid Infrastructure Services business unit you will:- Interact with renewable energy developers during the development or project conception phase and support the execution of engineering and design project work.- As a Senior Renewable Energy Engineer, you will take an active role in all aspects of the project, from project conceptualization, work planning, project design and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and problem solving a wide variety of challenges related to renewable energy facility designs and integration of new assets with existing infrastructure.- You will be responsible for client relationships, mentoring team members, overseeing projects, prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats, support interconnection applications and actively support the growth of our renewable energy group.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.”- In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.  S&L is actively expanding our renewable energy teams to our Glendale, AZ and Denver, CO offices.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Senior Protection & Control Engineer you will primarily prepare protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for preparing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform preparations of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

As a Lead Telecommunications Engineer in our Electric Grid Infrastructure Services business unit, you will:- Engage in fast-paced utility client projects to plan, engineer & design communications solutions to address operational requirements & emerging trends including Smart Grid, Distribution Automation and Smart Metering- Perform radio path studies including path profiles, propagation analysis, link power budgets, coverage studies- Recommend, coordinate and assist in licensing and permitting efforts- Develop network architecture designs based on TDM, SONET, IP / MPLS and other relevant standards- Prepare network and channel diagrams and perform timing studies- Design fail safe systems with path & equipment redundancies & diversity to serve mission-critical operations with extreme reliability- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP)- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory- Specify requirements and provide cost estimates for ancillary support systems including radio towers, outside (fiber) cable plant (typically OPGW & ADSS), DC power, grounding, fiber splice cases & distribution panels, shelters and outdoor enclosures, etc.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Lead Protection & Control Engineer you will primarily review the work of others.  That work will typically consist primarily of protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for reviewing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform review of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Nuclear Power is a carbon-free energy source.  We offer you the opportunity to utilize and expand your academic background in engineering by digitizing nuclear power plants: - You will work on a multi-discipline engineering team involved in nuclear power plant Instrumentation and Controls projects. These projects are a synergistic integration of electrical, computer and mechanical engineering along with control theory.- You will work with electronic process sensors, digital controllers, network topology, touchscreen displays, pumps, valves, heat exchangers, steam turbines and reactors.- You will prepare specifications for the procurement of instrumentation and control equipment as well as engineering calculations.- Through mentoring, classroom-style technical sessions, and on-the-job training, you will increase your knowledge and skills in your engineering discipline.- You will also have the opportunity to travel to client and vendor offices for design reviews and to plant site locations for project coordination and field verification of designs. 

- This position will offer you the ability to directly apply your knowledge of thermodynamics, heat transfer, fluid mechanics, and power plant engineering- You will be preparing calculations, specifications, and technical reports to support client recommendations and reviews, and will additionally conduct equipment sizing, optimization evaluation, and selection in response to project needs- While supporting project teams with other Mechanical Engineers, you will be involved in system engineering, including the design, modification, and analysis of power plant mechanical systems- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs

This position will offer you the opportunity to utilize and expand your academic background in Electrical Engineering in a professional position that offers a wide range of interesting and challenging responsibilities.  The opportunity will have you teaming up with other engineers and designers involved in nuclear plant electrical systems betterment and associated modifications, which will include the following:- Electrical systems design- Preparation of complex calculations- Load flow and short circuit- Power flow- System Impact- Cable ampacity- Preparation of documented design inputs- Preparation of equipment and material specifications- Preparation of design reportsAdditional opportunities will include:- Receive training and mentorship from experienced engineers in the execution of meaningful project engineering assignments- Become involved in power distribution designs and the preparation of specifications for the procurement of major electrical power equipment and related installation services- Travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs

This position will offer you the opportunity to utilize and expand your academic background in Electrical Engineering in a professional position that offers a wide range of interesting and challenging responsibilities.  The opportunity will have you teaming up with other engineers and designers involved in nuclear plant electrical systems betterment and associated modifications, which will include the following:- Electrical systems design- Preparation of complex calculations- Load flow and short circuit- Power flow- System Impact- Cable ampacity- Preparation of documented design inputs- Preparation of equipment and material specifications- Preparation of design reportsAdditional opportunities will include:- Receive training and mentorship from experienced engineers in the execution of meaningful project engineering assignments- Become involved in power distribution designs and the preparation of specifications for the procurement of major electrical power equipment and related installation services- Travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs