This position allows for a hybrid work schedule with a mix of work spent in office and working remote from home. - Work as part of a multi-disciplinary team as the E,I&C designer for multiple projects.- Work under the supervision of a more senior E, I&C designer to:- Design E, I&C scope for Oil & Gas projects while expanding knowledge on the application of engineering principles and a familiarity with construction, installation, and maintenance procedures- Using AutoCAD, creates design deliverable packages, while working closely with a discipline engineer/PM- Prepare layout, detail, sketch drawings and designs requiring the application of practical design knowledge- Assist with calculations with supervision from discipline engineer to determine conduit & cable sizes, cable tray fill, and indoor/outdoor lighting levels- Maintain effective communication with project team members and with clients, vendors, and contractors.

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Senior Protection & Control Engineer you will primarily prepare protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for preparing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform preparations of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for HV and EHV substations. As a Project Lead of an engineering and design team, you will work on a wide range of substation modifications and upgrades to support client requirements and reviews including creating calculations, document designs, and specifications. - You will be responsible for preparing relaying philosophies, including selecting relay, control, and communications equipment, developing SCADA and telecommunication concepts and configurations, and overseeing the preparation of I/O assignments and connection diagrams. - As a Project Lead Electrical Engineer, you will be responsible for guiding junior and senior-level engineers and designers in protection and controls engineering design efforts, including providing guidance with the coordination of detailed design phases for all aspects of the engineering work.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of engineering issues.- You will perform analysis and design of single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. Schematic diagrams.- Prepare engineering studies for client and peer review.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects.- As a Substation Electrical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues.- As an Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Under the guidance of the team lead(s), you will work in a project team environment with other engineers involved in executing water resources deliverables and other site development engineering in support of the design, modification, and analysis of power plant sites. The work may include the following responsibilities:- Flood level determination for 100-year and probable maximum flood scenarios.- Site evaluations considering local probable maximum precipitation events.- Design and/or analysis of cooling lakes, reservoirs, and canals.- Design and/or analysis of cooling water intake and discharge systems.- Wave force analysis and shore protection design.- Groundwater analysis.- Design of storm drains, open channel drainage, and storm water ponds.- Design of sanitary sewers and sewage disposal systems.- Design of wastewater surface impoundments and landfills.- Prepare site layout, grading, and drainage designs.- Design of roads and trackwork.

Under the guidance of the team lead(s), you will work in a project team environment with other engineers involved in executing water resources deliverables and other site development engineering in support of the design, modification, and analysis of power plant sites. The work may include the following responsibilities:- Flood level determination for 100-year and probable maximum flood scenarios.- Site evaluations considering local probable maximum precipitation events.- Design and/or analysis of cooling lakes, reservoirs, and canals.- Design and/or analysis of cooling water intake and discharge systems.- Wave force analysis and shore protection design.- Groundwater analysis.- Design of storm drains, open channel drainage, and storm water ponds.- Design of sanitary sewers and sewage disposal systems.- Design of wastewater surface impoundments and landfills.- Prepare site layout, grading, and drainage designs.- Design of roads and trackwork.This position is based on a hybrid work schedule and will require in-office work 3 days per week.

This position allows for a hybrid work schedule with a mix of work spent in office and working remote from home.  The Drafter position modifies complex drawing diagrams, layouts, and detailed drawings. This position interprets and incorporates engineering markups. Essential Duties and Responsibilities:- Provide general drafting CAD-based mechanical and electrical drawings for O&G projects while expanding knowledge on the application of drafting principles- Work under general direction of discipline supervisor in accordance with specific instructions regarding project deadlines, priorities, and budget constraints- Utilize company and project drafting standards, adheres to plans and schedules- Perform the necessary fieldwork; pulling measurements, locating tie-ins, as-building existing systems, etc.- Maintain effective communication with project team members- Provide support to other drafters and project team members in order to ensure a complete and timely design deliverable

This is a Project Lead Structural Engineer position that offers a variety of interesting and challenging opportunities in structural engineering and will provide an excellent opportunity to advance your career. In this position you will guide a team of structural engineers, interface with clients and engineers from other disciplines as well as manage a variety of exciting projects. This position will enable you to:- Apply your knowledge of materials, structural analysis, structural steel design, and reinforced concrete design in the successful execution of assigned tasks- Work on a wide range of projects for various clients and interface with them as required- Direct the preparation and review of design calculations, specifications, reports and other deliverables and support designers with drawing development.  - Supervise and mentor others in the development of quality engineering deliverables- Perform the structural analysis and design of steel frames, connections, concrete members, and foundations using our state-of-the-art computer tools- Travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designsThis position is based on a hybrid work schedule and will require in-office work 3 days per week.

This is a senior engineering position that offers a variety of interesting and challenging opportunities in structural engineering and will provide an excellent opportunity to advance your career. You will collaborate with a team of structural engineers, interface with engineers from other disciplines, and guide the work of less experienced project team members.  You will work with a structural engineering team on engineering projects for new nuclear facilities and upgrades and modifications to nuclear power plants in the following areas:- This position will offer you the ability to directly apply your knowledge of materials, structural analysis, structural steel design, and reinforced concrete design- As a member of an engineering and design team, you will work on a wide range of projects for various clients. You will prepare and review design calculations, develop specifications, and support designers with drawing development- Using our state-of-the-art computer tools, you will perform the structural analysis and design of steel frames, connections, concrete members, equipment and piping supports, and foundations- Additionally, you will conduct structural analyses, which include loading conditions such as wind and seismicThere is the potential for you to travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs This position is based on a hybrid work schedule and will require in-office work 3 days per week.

This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual. This position will offer you the ability to directly apply your knowledge of materials, structural analysis, structural steel design, and reinforced concrete design. As a member of an engineering and design team, you will work on a wide range of power transmission modifications and upgrades to support client recommendations and reviews including creating calculations, document designs, and specifications. - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of structural engineering issues.- You will perform structural analysis and detailed design of steel frames, connections, concrete members, equipment, and foundations. - Develop integrated structural designs and perform supporting calculations for the planned work.- You will have direct interface with the client and communicate technical information.- You will prepare technical specifications for structural materials.- You will Perform independent reviews of work performed by others, including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- You will develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - You will travel to client and vendor offices for design reviews and to substation locations for construction coordination and field verification of designs. Dependent upon your location, this opportunity offers a generous relocation package.

This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual. This position will offer you the ability to directly apply your knowledge of materials, structural analysis, structural steel design, and reinforced concrete design. As a member of an engineering and design team, you will work on a wide range of power transmission modifications and upgrades to support client recommendations and reviews including creating calculations, document designs, and specifications. - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of structural engineering issues.- You will perform structural analysis and detailed design of steel frames, connections, concrete members, equipment, and foundations. - Develop integrated structural designs and perform supporting calculations for the planned work.- You will have direct interface with the client and communicate technical information.- You will prepare technical specifications for structural materials.- You will Perform independent reviews of work performed by others, including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- You will develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - You will travel to client and vendor offices for design reviews and to substation locations for construction coordination and field verification of designs. Dependent upon your location, this opportunity offers a generous relocation package.

This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual. Responsibilities may include the following:- Design transmission lines in the 69kV to 765kV range.- Mentor and train less experienced design team members.- Coordinate design activities to ensure installation and operations will comply with specifications, codes, and client requirements.- Prepare reports and studies that present technical information in a clear and concise manner and meet client requirements and S&L formats.- Perform independent reviews of work performed by others including calculations, drawing preparation, and transmission line models based in PLS-CADD.- Adhere to Sargent & Lundy's System of Processes.Dependent upon your location, this opportunity offers a generous relocation package.  

This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual.- This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects.- As an Associate Electrical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues.- As an Associate Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - In addition, you may have the opportunity to travel to client sites as needed.Dependent upon your location, this opportunity offers a generous relocation package.

This position offers a hybrid schedule with the expectation of 3 days per week in the office, and the remainder remote / virtual. This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.Dependent upon your location, this opportunity offers a generous relocation package.

This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two daysThis position will offer you the opportunity to work in a project team environment with engineers and other designers involved in high voltage substation design. Your responsibilities will include, but are not limited to, preparation of the following design deliverables based on input from substation design and protection and control engineers:- Single Line Relaying & Metering Diagrams- AC & DC Schematic Diagrams- Equipment Interconnection Wiring Diagrams- Cable SchedulesOther responsibilities include, but are not limited to: - Providing technical guidance and mentoring to new designers.- Interpreting and incorporating vendor information into design deliverables.- Conducting walkdowns at client substation facilities.

This position allows for a hybrid work schedule with a mix of work spent in office and working remote from home. - As a Senior 3D Substation Physical Designer, you will be working in a project team environment with engineers preparing a high and or extra high voltage substation design package with minimum guidance. Producea3D Model that would generate the following drawings: General Arrangement, Electrical Equipment Plans, Sections, Electrical Connection Details, Foundation Plans, Grounding Plans, Grounding Details, Conduit and Trench Plans, Conduit Details, Control Building Layout, Control Building Details, Bill of Material, Cable Schedules, and a Shielding Plan. Using Inventor, AutoCAD, P4A and SDS software.- Interpret and incorporate vendor information into design deliverables.- Conduct walkdowns at client substation facilities.

Automation Engineers design SCADA systems to address operational requirements & emerging trends including Smart Grid, Substation & Distribution Automation applications, Battery Energy Storage, and Microgrid controllers. As an Automation Engineer in our Electric Grid Infrastructure Services business unit you will:- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.  - Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.- Provide reviews/design input of P&C drawings for SCADA system requirements.- Develop points lists for data transferred between RTUs, IEDs, and master station connections.- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).- Develop SCADA system and Network documentation for projects.- Develop automation tools to improve project efficiency (python, etc.)- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices as needed.This role offers a hybrid work arrangement. You'll be expected to spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Automation Engineers design SCADA systems to address operational requirements & emerging trends including Smart Grid, Substation & Distribution Automation applications, Battery Energy Storage, and Microgrid controllers. As an Automation Engineer in our Electric Grid Infrastructure Services business unit you will:- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.  - Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.- Provide reviews/design input of P&C drawings for SCADA system requirements.- Develop points lists for data transferred between RTUs, IEDs, and master station connections.- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).- Develop SCADA system and Network documentation for projects.- Develop automation tools to improve project efficiency (python, etc.)- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices as needed.This role offers a hybrid work arrangement. You'll be expected to spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days - This position will offer you the opportunity to utilize and expand your drafting skills, while working in a multi-disciplined team environment with other designers and/or engineers in the preparation of design drawings based on design input.- You will have the opportunity to apply your computer-aided drafting skills, while receiving hands-on training in 3D design software environments, such as AutoCAD 3D and/or MicroStation. Additionally, you will receive training in Sargent & Lundy’s award-winning, industry-recognized proprietary design databases.- You will be involved in creating master sketches to scale showing relation of proposed installations to existing facilities and exact specifications and dimensions.- You may accompany and assist experienced designers on walkdowns at client facilities to gather information for your design project. - While interfacing with vendors and construction contractors, you may be given the opportunity to explain your drawings so appropriate design adjustments can be made.  Dependent upon your location, this opportunity offers a generous relocation package.

As a Senior Engineer (DER) in our Electric Grid Infrastructure Services business unit you will:- Interact with variety of distributed energy resources, developers and electric utilities during the execution of engineering and design project work.- This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of utility-scale renewable energy projects.- As a DER  and Renewables Focused Senior Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues related to renewable energy power plant designs.- As an DER and Renewables Focused Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.”- In addition, you may have the opportunity to travel to client sites as needed.Dependent upon your location, this opportunity offers a generous relocation package.