This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects.- As a Substation Electrical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues.- As an Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement once this office opens. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Automation Engineers design SCADA systems to address operational requirements & emerging trends including Smart Grid, Substation & Distribution Automation applications, Battery Energy Storage, and Microgrid controllers. As an Automation Engineer in our Electric Grid Infrastructure Services business unit you will:- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.  - Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.- Provide reviews/design input of P&C drawings for SCADA system requirements.- Develop points lists for data transferred between RTUs, IEDs, and master station connections.- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).- Develop SCADA system and Network documentation for projects.- Develop automation tools to improve project efficiency (python, etc.)- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This is a hybrid position with the ability to work from our Downtown Chicago Office (3 days a week) and remotely (2 days a week). Nuclear Power is a carbon-free energy source.  We offer you the opportunity to utilize and expand your academic background in engineering by digitizing nuclear power plants:- You will work on a multi-discipline engineering team involved in nuclear power plant Instrumentation and Controls projects. These projects are a synergistic integration of electrical, computer and mechanical engineering along with control theory.- You will work with electronic process sensors, digital controllers, network topology, touchscreen displays, pumps, valves, heat exchangers, steam turbines and reactors.- You will prepare specifications for the procurement of instrumentation and control equipment as well as engineering calculations.- Through mentoring, classroom-style technical sessions, and on-the-job training, you will increase your knowledge and skills in your engineering discipline.- You will also have the opportunity to travel to client and vendor offices for design reviews and to plant site locations for project coordination and field verification of designs. 

This position will offer you the opportunity to utilize and expand your academic background in Electrical Engineering in a professional position that offers a wide range of interesting and challenging responsibilities.  The opportunity will have you teaming up with other engineers and designers involved in nuclear plant electrical systems betterment and associated modifications, which will include the following:- Electrical systems design- Preparation of complex calculations- Load flow and short circuit- Power flow- System Impact- Cable ampacity- Preparation of documented design inputs- Preparation of equipment and material specifications- Preparation of design reportsAdditional opportunities will include:- Receive training and mentorship from experienced engineers in the execution of meaningful project engineering assignments- Become involved in power distribution designs and the preparation of specifications for the procurement of major electrical power equipment and related installation services- Travel to client and vendor offices for design reviews and to plant site locations for construction coordination and field verification of designs

Project teams in our Energy & Industrial Group (EIG) support industry-leading projects in power generation, plant design, environmental compliance, mid/downstream oil & gas, and multi-disciplined industrial projects.  We’re leading efforts to decarbonize the industry by utilizing advanced technologies in renewable energy, carbon capture, and hydrogen power.  Our EIG teams perform detailed engineering services for photovoltaic (PV) solar projects and the integration of solar and energy storage.  We’re the industry leader in carbon capture technologies with experience executing pilot-scale to commercial-scale projects for utilities, industrial plants, and direct air capture.  We provide engineering services for green hydrogen production via electrolysis using solar, wind, hydro, and nuclear power sources and we support on-site usage in power generation, fuel cells, and fueling stations. Your responsibilities will include, but are not limited to:- You will be responsible for leading the Mechanical Engineering design efforts for a team of junior and senior engineers and designers.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of mechanical engineering issues.- Act as the Mechanical team lead in the coordination of detailed design phases for all aspects of mechanical engineering work.- Develop integrated systems designs and perform supporting calculations for the planned work.- Prepare technical specifications for mechanical engineering equipment.- Prepare engineering studies.- Perform independent reviews of work performed by others including calculations and drawing preparation.- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Perform reviews of existing facilities to propose upgrades and replacements, and present findings and recommendations to clients and peers.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers. 

This position allows for a hybrid work schedule with a mix of work spent in office and working remote from home. - This position will offer you the opportunity to utilize and expand your drafting skills, while working in a multi-disciplined team environment with other designers and/or engineers in the preparation of design drawings based on design input- You will have the opportunity to apply your computer-aided drafting skills, while receiving hands-on training in 3D design software environments, such as AutoCAD 3D and/or MicroStation.- You will be involved in creating drawings to scale showing relation of proposed installations to existing facilities and exact specifications and dimensions- You may accompany and assist experienced designers on walkdowns at client facilities to gather information for your design project- While interfacing with vendors and construction contractors, you may be given the opportunity to explain your drawings so appropriate design adjustments can be made

This position will offer you the ability to directly apply your knowledge of protective relaying and controls systems for distribution and high voltage substations. As a Lead Protection & Control Engineer you will primarily review the work of others.  That work will typically consist primarily of protection and control schematics and wiring drawings for a wide range of substation modifications and upgrades to support client requirements.  - You will be responsible for reviewing protective relaying philosophies, including selection of relay, control, and communications equipment, SCADA and telecommunication concepts and configurations, and I/O assignments and connection diagrams.  - You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of substation protection and control issues. - You will perform review of the designs prepared by others for single line diagrams, substation relaying & metering diagrams (i.e. A.C. schematic diagrams), and D.C. schematic diagrams. - Perform independent reviews of work performed by others. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of processes and associated “Communities of Practice.”  - Provide guidance as a mentor in the development of less experienced engineers. - There is the potential for you to travel to client and vendor offices for design reviews and to plant project site locations for construction coordination and field verification of designs. This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package. 

Automation Engineers design SCADA systems to address operational requirements & emerging trends including Smart Grid, Substation & Distribution Automation applications, Battery Energy Storage, and Microgrid controllers. As an Automation Engineer in our Electric Grid Infrastructure Services business unit you will:- Engage in fast-paced client projects to plan, engineer, & design SCADA and communications systems.  - Develop communication block diagrams, panel layout/bill of material drawings, SCADA AC & DC schematics, fiber detail drawings, & network drawings.- Provide reviews/design input of P&C drawings for SCADA system requirements.- Develop points lists for data transferred between RTUs, IEDs, and master station connections.- Develop configurations for Remote Terminal Units (RTUs) - (SEL RTAC, Novatech OrionLX, SMP Gateway, GE-D20, etc.)- Develop configurations for programmable automation controllers (PACs) – (SEL-2440/2411, etc.)- Program Human Machine Interface (HMI) applications (SEL Diagram Builder, Inkscape, Wonderware, etc.)- Coordinate with relay settings engineers to develop/review communication port settings for protection relays, meters, & other IEDs.- Develop network device configurations for switches, routers, & firewalls. (Cisco, Siemens Ruggedcomm, SEL, etc.)- Perform troubleshooting of SCADA system network & communication systems (DNP, Modbus, SEL Protocol, IEC 61850, TCP/IP, UDP) remotely and onsite (if required).- Develop SCADA system and Network documentation for projects.- Develop automation tools to improve project efficiency (python, etc.)- Stage, configure & test integrated systems designs, for interoperability & performance consistent with predictive models in our Protection, Automation & Telecommunication Laboratory.- Ensure strict adherence to NERC standards for Critical Infrastructure Protection (CIP).- Coordinate and provide guidance to other engineers, project managers, client personnel, and suppliers to ensure a complete and timely design. - Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of Sargent & Lundy’s systems of process and associated “Communities of Practice.” - Provide guidance as a mentor in the development of less experienced engineers.- There is the potential for you to travel to client and vendor offices as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to apply and expand your knowledge of underground transmission line engineering, including routing, duct bank configurations, manhole placement and electrical principles to:- Design of complex underground transmission lines for voltages up to 500kV- Responsible for cost analyses, development of design criteria, siting and routing in complex environments, and placement of manholes for underground transmission lines- Responsible for physical design including duct bank layouts, development of trenchless designs, cable pulling calculations, development of drawing packages- Responsible for cable selection studies, determining bonding scheme, performing ampacity calculations- Develop riser structure configuration and structural loading- Develop specifications including cable procurement, duct bank installation, trenchless installation, and general construction specifications- Work and coordinate with vendors and clients to specify transmission line components- Direct project team of other engineers, designers, and draftersThis role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to apply and expand your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to: - Design transmission lines in the 69kV to 500kV range. - Responsibility for cost analyses, development of design criteria, routing and siting of transmission lines. - Responsibility for conductor selection studies, shielding, grounding and induction studies. - Work with vendors and clients to specify transmission line components. The position will also offer you the opportunity to:- Work with a diverse client base and interact with the client and other project teams. - Occasional travel for site visits and client meetings.- Develop proposals and cost estimates for new work.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to apply and expand your knowledge of underground transmission line engineering, including routing, duct bank configurations, manhole placement and electrical principles to:- Design underground transmission lines for voltages up to 500kV. - Responsible for cost analyses, development of design criteria, siting and routing challenges, and placement of manholes for underground transmission lines. - Responsible for physical design including duct bank layouts, development of trenchless designs, cable pulling calculations, development of drawing packages. - Responsible for cable selection studies, determining bonding scheme, performing ampacity calculations.- Develop riser structure configuration and structural loading.- Develop specifications including cable procurement, duct bank installation, trenchless installation and general construction specifications. - Work and coordinate with vendors and clients to specify transmission line components. - Direct a small project team of other engineers, designers and drafters.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer the opportunity to manage project teams consisting of engineers, designers, estimators, controls, and scheduling professionals involved in Fiber and EDS design.- Work on challenging assignments from individual projects, large projects, and major programs.- Direct the Telecommunications and Automation Engineering team leads in the coordination of detailed design phases for all aspects of Grid Modernization engineering work.- Lead efforts to ensure projects are completed satisfactorily, with high quality, on time performance and to strict financial requirements and design criteria. - Coordinate systems design activities to ensure installation and operations will comply with specifications, codes, and client requirements. - Prepare reports and studies that present technical information in a clear and concise manner, and meet requirements and formats.- Perform and provide independent reviews of work performed by others, including scopes of work, proposals, procurement specifications, and contract documents.- Conduct fiber optic network design for middle mile and last mile fiber-based networks or Fiber to Facilities projects.- Equipment in the designs that support these systems include: Microwave and Point-to-Multipoint Radios, Fiber Optic Multiplexers, SONET and MPLS electronics, Channel Banks, LAN and WAN Switches and Routers, Communication Processors, RTUs, HMIs, AC and DC Auxiliary Power systems, and Asset Health Monitoring devices.Additional tasks include:- Take an active role in project conceptualization, work planning, and project execution.- Work on challenging assignments that include investigating and solving a wide variety of telecommunications engineering issues.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L's systems of process and associated "Communities of Practice." - In addition, there may be the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position offers you the opportunity to work in a project team environment with other engineers and designers involved in the detailed electrical design and project management of high voltage substation projects.- As a Substation Electrical Engineer, you will take an active role in project conceptualization, work planning, and project execution.- You will work on challenging assignments that include investigating, trouble-shooting, and solving a wide variety of electrical engineering issues.- As an Electrical Engineer, you will prepare reports that present technical and project information in a clear and concise manner and meet client requirements and S&L formats.- Develop your career via peer-learning through sharing of knowledge with other experienced engineers by way of S&L’s systems of process and associated “Communities of Practice.” - In addition, you may have the opportunity to travel to client sites as needed.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

Responsibilities may include the following:- Design transmission lines in the 69kV to 765kV range.- Mentor and train less experienced design team members.- Coordinate design activities to ensure installation and operations will comply with specifications, codes, and client requirements.- Prepare reports and studies that present technical information in a clear and concise manner and meet client requirements and S&L formats.- Perform independent reviews of work performed by others including calculations, drawing preparation, and transmission line models based in PLS-CADD.- Adhere to Sargent & Lundy's System of Processes.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.  

This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to apply and expand your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to: - Design transmission lines in the 69kV to 500kV range. - Responsibility for cost analyses, development of design criteria, routing and siting of transmission lines. - Responsibility for conductor selection studies, shielding, grounding and induction studies. - Work with vendors and clients to specify transmission line components. - Direct a small project team.The position will also offer you the opportunity to:- Work with experienced engineers and mentor less experienced staff.- Work with a diverse client base and interact with the client and other project teams.- Occasional travel for site visits and client meetings.- Develop proposals and cost estimates for new work.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.

This position will offer you the ability to directly apply your knowledge of transmission line engineering including, conductors, hardware, insulation, structures, foundations and electrical principles to:- Design transmission lines in the 69kV to 765kV range. - Perform structural analysis and design of pole, lattice, framed, and guyed structures.- Perform foundation designs.- Perform conductor selection studies, shielding, grounding and induction studies.- Develop cost estimates and schedules and prepare specifications for the procurement of transmission line materials and construction. - Specify transmission line components.- Model transmission lines in PLS-CADD, determine right of way requirements, calculate conductor sags, and develop transmission line plan and profile drawings. - Review vendor submittals.This role offers a hybrid work arrangement. You'll spend three days a week in the office, giving you the flexibility to work remotely for two days. Dependent upon your location, this opportunity offers a generous relocation package.